Skip to main content

99.3 Power Cycle Lunar Battery Block

O
Written by Ollie Wells
  1. Open the Inverter Aesthetic Cover side door and turn the rotary switch on the Inverter to the OFF position.

  2. Remove the Inverter Aesthetic Covers.

  3. Remove the Battery Blocks Aesthetic Covers.

  4. Identify Battery Block(s) needing power cycling.

  5. Open the hinged cap, and disconnect the trunk harness at the Battery Block(s).

  6. Wait one minute before reversing these steps to restore power to the system.

If all Battery Blocks need to be power cycled, the inverter trunk harness may be disconnected.

Did this answer your question?