Skip to main content

99.2 Power Cycle Lunar Bridge

O
Written by Ollie Wells

  1. Open the Inverter Aesthetic Cover side door and turn the rotary switch on the Inverter to the OFF position.

  2. Turn off the 50A ESS breaker located inside the Bridge.

  3. Turn off the Bridge feed breaker, usually located in the Main Service Panel.

  4. Remove the dead front cover of the Bridge and disconnect the low voltage 13V+ communication wire between the Inverter and the Bridge.

  5. Wait one minute before reversing these steps to restore power to the system.

Related Articles
Did this answer your question?